Doepfer



Product Image Item Name- Price
Doepfer A-100PB 2x3HE mit PSU3

Doepfer A-100PB 2x3HE mit PSU3



available in 3 to 6 weeksavailable in 3 to 6 weeks
798,00 €Details
Doepfer A-100PSU3 +/-12V, +5V 100-240V

Doepfer A-100PSU3 +/-12V, +5V 100-240V

12 V/5V switching supply  Suitable for qualified personnel only because of electrical safety (dangerous mains voltage 100V - 240V) technical details Dimensions:  ca. 200 x 80 x 40mm  12V / 2000mA  -12V / 1200mA  +5V /...

available in approx. 1 weekavailable in approx. 1 week
150,00 €Details
Doepfer A-101-1 Vactrol Steiner Filter

Doepfer A-101-1 Vactrol Steiner Filter

This is the first vactrol based module in the A-100 system. A vactrol is a combination of a light depending resistor (LDR) and a LED (light emitting diode) both put into a small light-proof case. Increasing the LED brightness causes a decrease of...

available in approx. 1 weekavailable in approx. 1 week
140,00 €Details
Doepfer A-101-2 Vactrol Lowpass Gate

Doepfer A-101-2 Vactrol Lowpass Gate

A-101-2 is a vactrol based combination of Low Pass filter (LP) and VCA and was inspired by the Buchla module 292.  The term "Low Pass Gate" was created by Don Buchla and stands for a module that can be switched between low pass and...

available in approx. 1 weekavailable in approx. 1 week
100,00 €Details
Doepfer A-101-6 Opto Fet VCF/Phaser

Doepfer A-101-6 Opto Fet VCF/Phaser

A-101-6 is a filter module that uses so-called opto FETs to control the filter frequency. Opto FETs are very similar to Vactrols but use light depending field effect transistors (FETs) instead of light depending resistors (LDRs). A opto FET is a...

in stockin stock
100,00 €Details
Doepfer A-102 Diode Low Pass Filter

Doepfer A-102 Diode Low Pass Filter

Module A-102 is a reproduction of the legendary low pass filter design that uses diodes in the filter stage as frequency controlling elements resulting in "strange" resonance behaviour and frequency response as resonance and frequency are...

available in approx. 1 weekavailable in approx. 1 week
85,00 €Details
Doepfer A-103 18dB Low Pass Filter

Doepfer A-103 18dB Low Pass Filter

Module A-103 is a voltage controlled low pass filter with 18dB/octave slope. The circuit is based on a modified transistor ladder (Moog ladder) and is a reproduction of the legendary TB303 filter.  - manual control of filter frequency  - 3...

available in approx. 1 weekavailable in approx. 1 week
85,00 €Details
Doepfer A-104 Quad Resonance Filter

Doepfer A-104 Quad Resonance Filter

A-104 is a fourfold formant filter as used in the Mixtur Trautonium by Oskar Sala. It is made of four parallel resonance filters, each filter can be switched to low pass or band pass or off.  Frequency, resonance and level are controlled for...

available in 3 to 6 weeksavailable in 3 to 6 weeks
140,00 €Details
Doepfer A-106-1 X-Treme Filter

Doepfer A-106-1 X-Treme Filter

More than a MS-20 filter clone! X-tremly flexible 12dB lowpass and 6dB highpass with separate ins for the filters and endless combinations of how to mix the filters and their polarities. An extreme, exceptional and experimental module with very...

available in 3 to 6 weeksavailable in 3 to 6 weeks
120,00 €Details
Doepfer A-106-5 12dB SEM Filter

Doepfer A-106-5 12dB SEM Filter

Module A-106-5 is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module.The filter is equipped with a band pass output and a combined low/notch/high pass output.  For this output a control knob defines the...

available in approx. 1 weekavailable in approx. 1 week
80,00 €Details

© 2015-2024 Raw Voltage        Shopsoftware: Zen Cart
We accept Amazon Pay, SOFORT Banking, PayPal and Credit Cards