Doepfer A-164-1 Manual Gate

Add to Cart:

60,00 €
incl. 20% VAT
plus shipping and handling

Availability:

shortly available

  • Model:
    [A-164-1]
  • Manufacturer: Doepfer



Module A-164-1 is equipped with 3 push buttons that are used to generate three separate manual gate signals (i.e. ~ +12V voltage output while button is operated, 0V when released).

The gate number (1, 2, 3) is milled into the caps and white inked.
Gate 1 is a bit different: provided that no plug is connected to the input socket it behaves like the other two manual gates (the socket is normalled to +12V via a protection resistor).
If a control signal (e.g. rectangle output of an LFO) is fed into the input socket the gate button 1 is working as a momentary on/off switch that is used to turn the signal on/off that appears at the two output sockets (kind of mute function).
Each Gate output has two sockets available (miniature multiple).
Internal jumpers can be used to connect Gate 1 or Gate 3 to the gate line of the internal A-100 bus. That way the module can be used to control one or more envelope generators (e.g. ADSR A-140) that are connected to the same bus board as the A-164.
The gate outputs are "smoothed" with 100nF capacitors to avoid contact bouncing. If Gate unit 1 is used to switch audio signals this capacitor should be removed as it works as a low pass filter for audio signals.

technical details

Width: 6HP

Connections:
2x Trigger inputs (channel 1)
2x Gate outputs (channel 1)
2x Gate outputs (channel 2)
2x Gate outputs (channell 3) 


Additional Images


© 2017 Raw Voltage        Programming: webchills        Shopsoftware: Zen Cart
We accept SOFORT Banking, PayPal and Credit Cards