Vermona Modular qMI 2 – Quad MIDI Interface

Add to Cart:

299,00 €
incl. 20% VAT
plus shipping and handling

Availability:

in stock, immediately available

  • Model:
    [HDBqmi]
  • Manufacturer: Vermona



Vermona´s second Eurorack module is a very flexible yet affordable MIDI/CV interface which can be up to four voice polyphonic. You can use it as four independent interfaces or in a mixed mode with simultaneous monophonic and polyphonic modes.

Each of the "output channels" has a CV output with 1V/octave, a gate output and two further control voltage outputs for MIDI controllers like modulation wheel and pitch bend wheel. The output channels can be combined arbitrarily with each other or used totally independent with different MIDI channels. Combined output channels can be unisono, monophonic with rotating voice assignation or polyphonic.

There are three clock divider outputs that convert incoming MIDI clock signals as analog gate voltages. A reset output allows e.g for keeping step sequencers (with an according reset input) by MIDI start/stop commands in sync. With the Gate-input you can switch between the playmodes M1 and M2 with a gate-signal

An important part of the concept is the simple use of all parameters without a display and complicated menu structures.

- pitch-CV: 1V/octave

- Gate voltages: 10V

- CV1, CV2: 0-5V (or -2,5V..+2,5V with pitch bend)

- legato function switchable per output channel

- clock outputs (10V): 1/4, 1/8, 1/16 and 1/8T (can be doubled)

- RESET output: 10V at MIDI STOP, 0V at MIDI START or CONTINUE

technical details

Width: 24HP

Connections:
MIDI-Input
4x Gate-Output
4x 1V/Okt-Output
4x CV1-Output
4x CV2-Output
Clock-Outputs A B C
RESET-Output
GATE-Input


Additional Images


© 2017 Raw Voltage        Programming: webchills        Shopsoftware: Zen Cart
We accept SOFORT Banking, PayPal and Credit Cards