Doepfer A-176 Control Voltage Source

Add to Cart:

65,00 €
incl. 20% VAT
plus shipping and handling


shortly available

  • Model:
  • Manufacturer: Doepfer

Module A-176 (Control Voltage Source) provides three voltage sources,
to use wherever an extra CV is required.

The top two voltage sources (CV 1 and CV 2) have controls
for coarse and fine control of the voltage output; the third source (CV 3) just has the one control.

The range of the voltages output can be preset,
either to 0 to +5 V or to -2.5 V to +2.5 V depending on your likely requirements.

There is a jumper on the circuit board for each of the three voltage sources.

A typical use for the module would be to provide fine as well as coarse tuning for an A-110 standard VCO,
(which, unlike the A-111, only has one tune control).

In general, this module will be useful whenever you need
a manually controllable CV on a module which doesn't itself have a built-in control.

technical details

Width: 8HP

2x CV outputs 1
2x CV outputs 2
CV output 3

Additional Images

© 2015-2018 Raw Voltage        Programming: webchills        Shopsoftware: Zen Cart
We accept SOFORT Banking, PayPal and Credit Cards