Patch cords
30 cm (black) with 2 mono plugs 3.5 mm

technical details

Length 30 cm

Patch cords
15 cm (yellow)

technical details

Length 15 cm

With stackcables, you always have a (passive) multiple at your hand. A set of them in your system lets you think of new patching ideas automatically.

Patch cords
50 cm (grey) with 2 mono plugs 3.5 mm

technical details

Length 50 cm

CHA/V 3.0 (2021) is the newest DIY PCB version of the cheap, hacky, audiovisual synthesizer, based on the tutorial “How to Make a Crap Video Synth for $10”, and recently included in Handmade Electronic Music.
VGA devices have a surprisingly tolerant of window for accepting signals that are nowhere near spec. CHA/V devices happily hurl garbage into that window. This is not a precision instrument by any means, but it’s a cheap and convenient way to experiment with VGA hacking and analog video synthesis basics.

• improved signal routing
• improved component footprints (easier to build)
• expansion header for use with VGA4EVA

In previous versions it was necessary to source a VGA test signal generator and wire it to the CHA/V. This is still an option, but no longer necessary when the CHA/V is built with VGA4EVA.

Shipping costs reduced to EUR 5,- when only CHA/V in shopping cart!

Quality patch cables in beautiful colours.

Quality patch cables in beautiful colors

With stackcables, you always have a (passive) multiple at your hand. A set of them in your system lets you think of new patching ideas automatically.

Quality patch cables in beautiful colours.

Quality patch cables in beautiful colours.

Quality patch cables in beautiful colors.

Quality patch cables in beautiful colours.

Patch cords
80 cm (red)
with 2 mono plugs 3.5 mm

technical details

Length 80 cm

Batumi is a digital quad LFO with some clever and usable functionalities. First of all, each LFO can run free and independent from each other.

Above that, there are three more very useful modes where the LFOs are synchronized to each other. In these modes, LFO 1 acts as a master regarding to frequency.

• Quadrature: LFOs 2-4 are following LFO 1 - each 90 degrees shifted in its phase
• Phase: Phase shifting of LFO 2-4 can be set individually using the sliders
• Divide: LFO 2-4 can be set to different divisions of LFO 1 frequency

Also, the LFOs are syncable to a clock signal (alternatively you can use jumpers on the back of the module to set the function to the more classical "reset" behavior).
Each LFO of the Batumi has three dedicatet outputs, providing sinewave-, sawtooth- and puls-output. Sawtooth-Output can be altered to alternative waveforms by changing jumper settings on the back of the module. XAOC is also offering a breakout module called "Poti" to bring these functions to the front panel.

Quality patch cables in beautiful colors

Quality patch cables in beautiful colours.

Quality patch cables in beautiful colors.

Quality patch cables in beautiful colors.

Module A-180-1 is a simple multi-connector.

It has eight inter-connected sockets, so that you can patch more inputs or outputs into any module.

The sockets are split into two groups of four.

If an 8-fold multiple is required a bridge has to be soldered at the pc board.

Even though the A-180-1 is a very "primitive" low-level module it is required very often. Within a big A-100 system sufficient multiples should be planned.

technical details

Width: 4HP

Connections:
2x 4 Signal I/O

3,5 mm patch cords with Verbos-logo
5-pack
gold plated contacts
color: gray

technical details

Length: 60cm

Quality patch cables in beautiful colors

Buscable to power your modules - 10 to 16 pins

The new book about modular synths, their makers, and masters. Patching secrets, performance tips, history, modules, and techniques.

PATCH & TWEAK provides an opportunity for new and experienced users to become true masters of their modular systems by exploring, explaining, and demystifying a range of topics relevant to anyone interested in modular synths or just synthesis itself.

A cornerstone of PATCH & TWEAK is a bouquet of inspirational interviews with significant creators and major artists. Learn about their systems, philosophies, patching secrets, performance tips, and passion for modular synthesis.
Besides a comprehensive introduction to synthesis and its history, the book covers systematic sections on concepts, purpose and creative possibilities of specific modules. Enjoy colorful diagrams, presentations of both popular and rare modules, semi-modular and software, as well as techniques for patching and how to get started.

PATCH & TWEAK has a foreword by Suzanne Ciani, is written by Kim Bjørn and Chris Meyer, and edited by Paul Nagle.

RGB mini snake patch cable.

Quality patch cables in beautiful colours.

Quallity patch cable in beautiful colors.

Quality patch cables in beautiful colours.

Quality patch cables in beautiful colors

Quality patch cables in beautiful colours.

Quality patch cable in beautiful colours.

Patch cords
120 cm (blue)
with 2 mono plugs 3.5 mm

technical details

Length 120 cm

Module A-140 is an envelope generator, and, since it puts out control voltages, counts as one of the modulation devices in a modular system.

As soon as the gate input receives sufficient voltage, the ADSR generates a variable voltage, changing in time, called an envelope.

This varying voltage is output in normal (positive) and inverted form, and can be used, eg., for voltage controlled modulation of a VCO, VCF, or VCA, or for processing other modules' inputs and outputs.

The shape of the envelope is governed by four parameters: Attack, Decay, Sustain and Release.

The envelope is started (triggered) by a gate signal either from the INT.GATE voltage on the system bus, or, if a signal is put into it, from the gate input socket.

The envelope can also be re-triggered, ie. start from scratch again, each time a trigger signal is sensed at the Retrig. input socket, when the gate is still open.

Module A-140 has available a three-position toggle switch to select one of three time ranges. The envelope duration ranges from about 50us (microseconds) up to several minutes.

In combination with the Comparator module A-167 a free-running "ADSR-LFO" can be realized.

technical details

Width: 8HP

Connections:
Gate input
Retrigger input
Output 2x
Output (inverse)

Quality patch cables in beautiful colors.

Patch cords
200 cm (green)
with 2 mono plugs 3.5 mm

technical details

Length 200 cm

RGB mini snake patch cable.

3,5 mm patch cords with Verbos-logo
5-pack
gold plated contacts
color: gray

technical details

Length: 22cm

Quality patch cables in beautiful colours.

Ether V2 is an "Anti-Radio", which makes all electromagnetic radiations from Hertz to the Gigahertz range audible. In contrast to an electromagnetic sniffer, which uses only a coil and a low-frequency amplifier, Ether also incorporates classic radio circuits, such as a demodulator for retranslating high-frequency signals into the audible range.

Built into a slim housing, it can be used almost anywhere and invites to acoustic voyages of discovery. By aligning the antenna pins, the receiver can be roughly limited and it is also worthwhile to hold the antenna pins to all possible metal struts, grids and other objects, even your own body, which then function as an extended antenna.

Ether is powered by 2 AAA batteries and has a headphone/audio output, a volume control and a high frequency gain control. The operating time with one battery charge is well over 100 hours.

Quality patch cables in beautiful colors

A passive 1-into-5 multiple in a star shape - very simple, very practical.

RCA sync cable for LZX video modules.

Dissect sonic energy into a rainbow of visual modulation sources! Sensory Translator is an audio-to-video interface module designed to generate a variety of visually rich animation control signals. The audio input and internal microphone are mixed together and processed by Bass and Treble tone controls before being fed into a bank of five 4-pole Band Pass Filters. These bandpass filter outputs are then processed by individual envelope followers. Each envelope follower has 3 decay speeds, as well as an Impulse mode for beat-to-trigger extraction. All signal paths and control ranges are compatible with standard EuroRack audio module signal ranges, so this module is equally at home in an audio synthesis system.

Omnidirectional electret microphone mounted on the frontpanel, 3 preamp gain settings and dedicated output.
External audio input selectable between line and modular level voltages.
2-input mixer including equalizer with bass/treble controls.
Five 4-pole precision bandpass filters, each with 2-octave bandwidth.
Five envelope followers with three decay speed settings, dedicated LED indicators, and selectable impulse mode for beat-to-trigger detection.

Mounting Depth 1.25 inches
+12V Power Consumption 80 mA
-12V Power Consumption 70 mA

Quality patch cables in beautiful colours.

CHA/V Designs - VGA4EVA

VGA4EVA is a hacky VGA signal generator based on Arduino, and designed as the first CHA/V expansion module. Prior to VGA4EVA, it was necessary to source a VGA test signal generator and wire it to the CHA/V. VGA4EVA replaces the test signal generators and adds some features:

• Patchable triple filter/attenuator
• Background patterns and sync hackable
• RGB background pattern channels are independently patchable
• Background patterns can be used as weird oscillator sync sources
• Dedicated 3.5mm output jacks for horizontal and vertical sync pulses
• No longer requires any wiring � attaches to CHA/V via pin headers

VGA4EVA is compatible with CHA/V 3.0, and also CHA/V 2.0. Previously built versions of the CHA/V 2.0 require a free adapter PCB.

Although VGA4EVA is designed to be the brain of a CHA/V, it can also be built as a standalone device with limited functionality. As a standalone device, VGA4EVA can act as a rudimentary video encoder for audio and sync source for oscillators.

Shipping costs reduced to EUR 5,- when only CHA/V in shopping cart!

Quality patch cables in beautiful colours.

Quality patch cables in beautiful colors

RCA sync cable for LZX modules.

RCA sync cable for LZX modules.

High quality 3.5mm / 6.3mm adapter cable with gold plated connectors and Verbos logo.

Length: 150 cm
Color: Grey

Pack of 2

Quality patch cables in beautiful colours.

Flying bus board with 12 connectors

50 of our unique screws designed specifically for Eurorack. These M3 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.

Each Knurlie comes with a fitted plastic washer to prevent rack rash.

Quality patch cables in beautiful colours.

Quality patch cables in beautiful colours

The A-180-3 is a dual buffered 1-in-3 multiple. The signal applied to the input socker appears as a buffered signal at the three output sockets. Each output has it's own buffer, i.e. the three output sockets are not simply connected to each other. The lower output of the upper unit is normalled to the input of the lower unit. That way the module works as a single 1-in-6 buffered multiple provided that no signal is applied to the input of the lower unit.

Application: copying/buffering of control and audio signals.

technical details

Width: 4HP

Connections:
2x inputs
6x outputs

Quality patch cables in beautiful colors.

Quality patch cables in beautiful colours.

Quality patch cables in beautiful colours.

Buscable to power your modules - 16 to 16 pins

Profile set: two anodized aluminium mounting profiles (front rails), ~ 427 mm long, incl. mounting screws, for DIY of A-100 cases or expansion of A-100 DIY kit #1 by another row

Quality patch cables in beautiful colours.

Quality patch cables in beautiful colours.

Quality patch cables in beautiful colours.

A passive 1-into-5 multiple in a star shape - very simple, very practical.

Module A-124 is a special 12dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the seventies, manufactured by the UK company "Electronic Dream Plant").

This design "abuses" digital inverters as analog operational amplifiers leading to distortions and other "dirty" effects that generate the specific sound of this filter.

The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates.

The module does not feature self oscillation in contrast to most of the other filters of the A-100 system.

Inputs: Audio In, CV In (2x)
Outputs: Bandpass Out, Low/Highpass Mix-Out
Controls: Audio and CV attenuator, Frequency, Resonance, LP/HP Mix

technical details

Width: 8HP

Connections:
Audio input
CV1 input
CV2 input
BP Audio output
LP/HP Audio output

Quality patch cables in beautiful colours.

12 V/5V switching supply

Suitable for qualified personnel only because of electrical safety (dangerous mains voltage 100V - 240V)

technical details

Dimensions:
ca. 200 x 80 x 40mm

12V / 2000mA
-12V / 1200mA
+5V / 4000mA
Mains Voltage 100...240V

The Clock VCO is a square wave Voltage Controlled Oscillator with a linear response to CV. Used as a clock source for modules such as the Shift Register and Counter. Horizontal and Vertical frequency ranges.

+12V Current Consumption: 9mA
-12V Current Consumption: 7mA

Bill of material and schematic on LZX product page​

Attention: Castle Series printed circuit boards and EuroRack frontpanels are offered as a resource for intermediate and advanced level Synth DIY enthusiasts who are experienced with assembling thru hole electronics assemblies and sourcing electronic components.

Building DIY kits happens on your own risk. We can't do support or give a guarantee for correct function, because that depends on your own skills. Be responsible and check the building instructions before you buy. Thank you!

Zadar is a powerful, four-channel envelope, modulation, and transient generator, in a compact yet very complete, feature-rich package. It is capable of synthesizing a vast palette of envelope shapes starting from hundreds of shapes stored in the memory. These starting shapes are not mere wavetables, but flexible vectors that can be stretched (from a fraction of a millisecond to half an hour), flipped, warped, distorted, delayed, shuffled, repeated, and amplitude modulated in real time.
A set of freely assignable CV inputs allows for external control of most parameters. Each channel can work independently or combined with other channels within one of the chaining and looping algorithms. Operating Zadar is quick and immediate, thanks to its accessible interface and crisp OLED display. The main screen displays all parameters together with the currently selected shape. Entering the simple 3-page menu is needed only for advanced settings. For detailed description, please refer to the manual.

Features

• four independent channels
• 260 unique vector shapes
• cycle time range: 0,85ms to 30min
• shapes can be radically modified in two dimensions
• immediate operation, accessible interface
• complex envelope looping and chaining features
• assignable CV inputs to control nearly every parameter
• 18 preset slots

Technical Details

• eurorack standard compliant
• 10 hp wide
• skiff friendly
• current draw: +90mA/-40mA
• secured against reversed power connection

100 pieces of the unique screws designed specifically for Eurorack. These M3 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.

Each Knurlie comes with a fitted plastic washer to prevent rack rash.

A passive 1-into-5 multiple in a star shape - very simple, very practical.

321 / derived from triple “two functions” editing section, unified in two outputs.

The 321 includes the most useful functions we always need in every patch, to edit and combine dynamically the signals in use.

It is composed of three identical sections, the red, yellow and green, where each of those is capable of scaling any signal, from 0 up to 2 times (+6dB), flip its phase, and apply a DC offset, allowing to shift your audio or CV up or down.

In case no signals are connected to the section input, the offset may act as a CV source too.

The three sections are then summed together into two independent summing stages: the top right jack outputs the sum of all three sections, while the top left outputs the sum of the unconnected sections only (semi-normalled).

The 321 is entirely DC coupled, allowing the process of control voltages as well as audio signals.

In case CVs or audio signals are particularly hot, the two 6dB attenuators, one per each summing section might be helpful to reduce exactly by 50% the incoming signals.

Size 6HP

Depth 38mm

Power Requirements

48 mA +12V idle
48 mA -12V idle

Chromagnon is the first release of LZX' Automata series

• Standalone and EuroRack out of the box. Includes an injection molded shell enclosure for standalone use. Power from EuroRack power header or any 12V DC wall wart.
• A holistic visual instrument or core module for EuroRack video synthesis. Includes video sync generation, video input w/frame synchronizer, video output interface, complex cartesian processor and quad waveform generators.
• Multi format visuals. Chromagnon supports several complete workflows within a simple interface: colorization, chroma keying, quadrilateral figure generation, and arbitrary raster generation for scan processing with ILDA lasers and XY displays.
• Third generation LZX analogue circuitry. High performance discrete wideband circuitry based on a decade of incremental research and development.
• Analog HD Video Interfaces. Video and sync generation up to 1080i60. Bring your existing LZX video synthesis system into a high resolution era.

Width: 52HP
Mounting Depth: 42mm
Power Consumption: TBD
Included Items: 52HP EuroRack module with standalone enclosure and 12V DC wall wart power adapter, lab exercise manual, 5ft composite video cable, 2x 3.5mm patch cables, 12V DC power jumper cable, EuroRack power cable, club.

Frontpanel artwork and enclosure renders are a work in progress and may change. The rear face of the instrument will also include trimmable adjustments for the XY monitor and ILDA interfaces.

Quality patch cables in beautiful colours.

A passive 1-into-5 multiple in a star shape - very simple, very practical.

A passive 1-into-5 multiple in a star shape - very simple, very practical.

Module A-110 is a voltage-controlled oscillator. This VCO's frequency range is about eight octaves (ca. 15Hz ... 8kHz). It can produce four waveforms simultaneously: square, sawtooth, triangle, and sine wave.

The frequency or pitch of the VCO is determined by the position of the octave (Range) switch and tuning (Tune) knob, and by the voltage present at the CV inputs.

Frequency modulation (FM) of the VCO is therefore a possibility.

Footage (the octave of the fundamental) is set by the Range control in five steps, and Fine tuning controlled by the Tune knob by about +/-1 one semitone (can be modified for a wider range).

You can control the pulse width of the square wave either by hand, or by voltage control - Pulse Width Modulation or PWM.

Technical remarks:
The core of the A-110 is a sawtooth oscillator (in contrast to the A-111-1, which is based on a triangle oscillator).

The other waveforms are derived from the sawtooth by internal waveform converters. As the sawtooth reset (i.e. the back-to-zero slope) is not infinite fast but takes a little bit of time the derived waveforms triangle and sine are not perfect ! At the top of the waveform they have a small glitch or notch that is caused by the sawtooth reset and cannot be eliminated by the waveform converters. The sine is derived from the triangle by a simple diode-based converter and
the sine shape is not perfect (only a rounded triangle).

technical details

Width: 10HP

Connections:
Sync input
CV1 input
CV2 input
PW CV1 input
PW CV2 input
Sawtooth output
Pulse output
Triangle output
Sine output

Milky Way is a stereo FX module already know from the Blck_Noir and the Grand Terminal. It offers 8 types of effects.

simple and effective 6hp stereo FX module
8 types of effects available with meta CV scanning, 2 famous Airways and Darkwaves banks (more banks coming soon)
volume control with VCA

Airways:

• Hall Reverb
• Shimmer Reverb
• Stereo Room Reverb
• Plate Reverb
• Spring Reverb
• Ping-Pong Delay
• Tape Echo Delay
• Chorus

Darkwaves:

• Gated Reverb
• Spring Reverb
• Ping-Pong Delay
• Flanger
• Ring Modulator
• Overdrive
• Compressor
• Freezer

HP : 6

Diver

Waveform Visualizer

A new concept in pattern generation for video synthesizers. Diver is a single axis waveform sampler and digital effects buffer which translates audio signals to the 2D space of the analog video frame. Any audio source instantly becomes a powerful component of your video synthesis toolbox.

Width, 16HP
Mounting Depth, 50mm
Power +12V @ 180mA
Power -12V @ 180mA

Ripples is a classic, big-sounding analog four-pole filter in a small 8-HP package. Over the years it has earned its reputation as a no-fuss, elegant choice.

Ripples has two input paths: one with a drive control, allowing the signal to be distorted (or providing enough gain for the processing of line-level signals), and the other totally transparent, preserving the clean-sounding character of the original version of the module.

Three filter modes are available: high-pass, band-pass, and low-pass. The slope (2 or 4 poles) of the band-pass and low-pass outputs is switchable.

Self-oscillation is available for all modes and produces a clean sine-wave on the low-pass output. Unlike many classic 4-pole designs, this filter does not suffer from “loudness drop” when resonance is increased. The resonance loudness compensation circuit brings a slight tone coloration reminiscent of Japanese classics from the 80s, with a very round and liquid resonance.

The low-pass output goes through an internal VCA. This makes Ripples a good final stage module for an inexpensive, or space-constrained, subtractive synthesis synth voice.

Quality patch cables in beautiful colours.

Module A-151 (Quad Sequential Switch) is like an electronic four-position rotary switch.

It includes trigger and reset inputs, four in / outputs, and a common out / input.

Each time a pulse is received at the trigger input socket, the common out / input is connected to the next in / output.

After the fourth in / output, the next trigger makes it step back to the first again, and so on.

A positive pulse at the reset input switches the out / input immediately back to the first in / output.

Voltages in the range -12V...+12V at the O/I resp. I/O sockets can be processed by the module.

Four LEDs indicate the active in / output (ie. the on that is connected to the out / input at any particular time).

From spring 2005 a revised version of the module is available.

With an additional switch the number of steps can be set to 2, 3 or 4

technical details

Width: 4HP

Connections:
Trigger input
Reset input
O/I
I/O 1
I/O 2
I/O 3
I/O 4

The Analog to Digital Converter is used to change an analog input signal in to a 3-Bit data stream. Bias and Gain (+/-N) are used to scale and bias the input signal. Use this module to interface with the rest of the Castle series or as a hard zone colorizer by itself.

+12V Current Consumption: 21mA
-12V Current Consumption: 28mA

Bill of material and schematic on LZX product page​

Attention: Castle Series printed circuit boards and EuroRack frontpanels are offered as a resource for intermediate and advanced level Synth DIY enthusiasts who are experienced with assembling thru hole electronics assemblies and sourcing electronic components.

Building DIY kits happens on your own risk. We can't do support or give a guarantee for correct function, because that depends on your own skills. Be responsible and check the building instructions before you buy. Thank you!

FKG3 Keyer serves a wide range of creative image compositing functions.

• Analogue logic based keying modes: Luma Key, Chroma Key Red, Chroma Key Green, and Chroma Key Blue.
• Variable edge allows operation from crossfader to hard key.
• Patch in monochromatic sources seamlessly via switched RGB input jacks.

LZX Gen3 Design Standards

• Long lifespan pots, jacks and mechanical switches.
• Active switching and gain control of the entire signal path.
• Toggle and rotary switches latched to vertical refresh
• Integrated ultra low noise power supplies.
• Powered via 12V DC barrel or EuroRack power header.
• Mounting depth 42mm max, with either power option installed.

Specifications

• 12HP EuroRack Module
• +12V Power Consumption, 225mA

Quality patch cables in beautiful colours.

Banana cable for Buchla systems

Patch cords
50 cm (transparent) with 2 mono plugs 3.5 mm

technical details

Length 50 cm

BLCK_Noir is a complex 7 voice analog drum/percussive synthesizer module based around analog discrete CR-68/78 circuits with advanced noise spectrum animation and effect processor.

Features:

• 30 HP width under a black panel, < 2 cm or 3/4“ in depth
• 7 drum voices in the analog kit: bass drum, snare, tambourine, closed and open hi-hats, metallic beat and cymbal
• hybrid sound generation: band-limited digital noise with spectrum animation, injected into analog circuits
• full discrete analog generation part, using inductor coils instead of op-amps
• on-board effect processor with 8 drum-oriented effects, including additional auxiliary input and firmware update over audio
• drums that have character: fit all styles of music – specifically tuned for darkwave and techno
• separate analog outputs and isolator-style final filter with resonance for main outputs
• black knobs with glow in the dark lines for navigation in the darkness.

It was made with dark electronic music in mind – strong live performance features, vintage flavour, limited in some ways to maximize the usability, suitable for various styles of music – from Electro to Hip Hop, Synthpop to Industrial and Complex Techno.

Lyra-8 is a fully analog Drone-Synthesizer with a rather complex but well thought architecture that is made for live playing and exploring its territories.

8 free adjustable oscillators are the basis of its sound. They can be played seperately or in wild FM mode. Grouped into 4x2 voices, each pair can be further modified by the so called Hyper LFO (two logically connected LFOs). Also there is an envelope for each pair of oscillators. The LFO can also be replaced by an external control voltage.The signal can then be processed by the internal delay section which is a two line delay, capable of crossmodulating each other. At the end of the signal path you find an overdrive circuit. The Lyra can be played via 8 toch panels in a very expressive way. Soundwise, it can go from nice and lush moving soundscapes up to crazy noise thunderstorms. An exceptional Instrument!

Quality patch cables in beautiful colours.

A passive 1-into-5 multiple in a star shape - very simple, very practical.

The Quandrantid Swarm is a versatile, unique instrument for sound designers and musicians looking to explore exquisite and unfamiliar timbres that range from subtle to outrageous, nebulous to shimmering.

It features a digital synthesizer voice with a percussive element, two pole analog filter, an LFO with eight waveforms, and a spring reverb. The 8 touch keys can be used as a mono keyboard, polyphonic keyboard or an eight step sequencer. The synth interfaces with other instruments via MIDI, and CV/Trig inputs. Pre-patching allows you to get hands on immediately, but you can and should use patch cables to to fully explore the potential of this instrument.

The 333 is a summing and distribution module for eurorack modular systems.

It is composed of three identical sections, the red, yellow and green, each of those featuring a three inputs summing amplifier with three independently buffered outputs.

The sum section is DC coupled, allowing the sum of control voltages as well as audio signals.

In case CVs or audio signals are particularly hot, the 6dB attenuator might be helpful to reduce exactly by 50% the incoming signals.

The module can also work as a 1 to 9 buffered multiple.

Lyra-8 is a fully analog Drone-Synthesizer with a rather complex but well thought architecture that is made for live playing and exploring its territories.

8 free adjustable oscillators are the basis of its sound. They can be played seperately or in wild FM mode. Grouped into 4x2 voices, each pair can be further modified by the so called Hyper LFO (two logically connected LFOs). Also there is an envelope for each pair of oscillators. The LFO can also be replaced by an external control voltage.The signal can then be processed by the internal delay section which is a two line delay, capable of crossmodulating each other. At the end of the signal path you find an overdrive circuit. The Lyra can be played via 8 toch panels in a very expressive way. Soundwise, it can go from nice and lush moving soundscapes up to crazy noise thunderstorms. An exceptional Instrument!

Mutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing.

You also get a three position switch giving you: MOMENTARY signal pass through (it springs back to the centre when released); OFF (or muted) in the centre; and ON to the right. We’ve also added vactrols to the circuit giving the switching a pleasing decay for both audio and modulation as well a totally click free muting. This module can add mutes to anything, your mixer, module inputs or outputs, modulation signals, sequencers, gate sources and more.

Key features 4HP // LEDs to visualise signals // 3 way momentary – off – on switching // buffered and cascading normalising of inputs // black metal panel // Vactrol based muting