New Products

Module A-120 is a voltage controlled low-pass filter, which filters out the higher parts of the sound spectrum, and lets lower frequencies pass through. The Cut-Off

Module A-121-3 is functionally nearly identical to module A-121-2. Only the distances between the controls and sockets are smaller and rubberized, small rotary knobs are

Module A-124 is a special 12dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case

Module A-124 is a special 12dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case

Module A-125 (VC Phaser) is a voltage controlled phase shifter.  Phase shifting can be controlled either manually or by voltage control.  Other parameters

Module A-127 is a triple resonance filter unit. It contains three separate voltage controlled band pass filters.  Each filter has it's own LFO (triangle

Module A-128 (Fixed Filter Bank) is a filter bank, made up of 15 parallel band pass filters, all with fixed middle frequencies and bandwidth  (50 Hz / 75Hz / 110Hz

Module A-130 provides voltage-controlled amplification.  For audio signals, you would normally use the exponential VCA (A-131), and for control voltages, the linear

Module A-131 provides voltage-controlled amplification.  For audio signals, you would normally use the exponential VCA (A-131), and for control voltages, the linear

Module A-132-1 contains two voltage controlled amplifiers, with a linear response most suited to regulating the level of control voltages (ADSR amount, level of vibrato

Module A-132-3 is composed of two identical voltage controlled amplifiers (VCA).  Each VCA has a manual gain control and a control voltage input with attenuator.

Module A-132-3 is composed of two identical voltage controlled amplifiers (VCA). Each VCA has a manual gain control and a control voltage input with attenuator. The