New Products

RCA sync cable for LZX video modules.

The Analog to Digital Converter is used to change an analog input signal in to a 3-Bit data stream. Bias and Gain (+/-N) are used to scale and bias the input signal. Use

The Digital to Analog Converter is a dual module to convert two 3-Bit data streams into two Analog approximations. Think of it as weighted summing mixers, with the MSB

The Clock VCO is a square wave Voltage Controlled Oscillator with a linear response to CV. Used as a clock source for modules such as the Shift Register and Counter.

The Shift Register is a 4 position memory of sorts. A bit is loaded from the DATA input at a logical “high” signal at the CLOCK input and appears at the Q0

The Quad Gate uses a single quad logic chip and combines them in 4 different ways. A1 and B1 are combined and appear at OUT1. A2 and B2 are combined and appear at OUT2.

The Counter is a 4-Bit clock counter/divider. Each successive output from Q0 to Q3 is half the frequency of the previous. When used as a binary word it counts from 1 to

The D Flip Flops are three D type Flip Flops that share a common Clock and Reset. Each Flip Flop can be thought of as a single bit sample and hold. The signal present at

This module comprises two fully featured, and beautiful sounding 12db multimode filters, based around the classic vintage SEM filters. Each individual filter has LP, BP

321 / derived from triple “two functions” editing section, unified in two outputs. The 321 includes the most useful functions we always need in every patch,

The A-100 Low Cost Base has the same width as the A-100 Low Cost Cases (A-100LC6/LC9) and is planned as a base frame for the A-100 Low Cost Cases. But it can be used

The quadroPOL is a multi-functional module with four identical channels. Each of them can individually work as a manual or voltage controlled attenuator and inverter, a