New Products

Module A-183-1 is a simple passive dual attenuator. Passive means, that each unit is made of two sockets and a 50k linear potentiometer only. There are no active parts

Module A-182 is a simple passive multi-connector. In contrast to module A-180 each socket is equipped with a 3-position switch that allows to connect the corresponding

Two multiples with one 1/4 jack socket and two 3.5mm jack sockets each, upper multiple is wired monophonic, lower is wired stereophonic. technical details Width: 4HP

The A-180-3 is a dual buffered 1-in-3 multiple. The signal applied to the input socker appears as a buffered signal at the three output sockets. Each output has it's

Module A-180-1 is a simple multi-connector. It has eight inter-connected sockets, so that you can patch more inputs or outputs into any module. The sockets are split

Theremin module for generating a variable control voltage by approaching/removing hand to/from an antenna. The distance range is about 30 cm. Additionally the module is

Economically priced module for connecting one foot controller and one double foot switch for control A-100 functions by means of the feet. For example the frequency of a

A-174-2 is a modulation wheel module with two wheels. The factory setting is a spring loaded wheel at the left side with bipolar voltage output (i.e. 0V in center

Much more than just a plaing slew limiter the A-171-2 is a multi-functional module for generating and processing control voltages and audio signals in the manner of a

Module A-170 contains two separate slew limiters, also known as portamento controllers or integrators. The first SL has just one joint control, which sets both rise and

Dual logic module with 3 inputs for each unit. The logical states of the inputs ("1" = high / "0" = low) are linked together in 3 ways: AND, OR, EXOR

Module A-162 contains two identical circuits that generate a trigger signal with adjustable delay and lenght from an incoming rectangle signal (e.g. gate, trigger,