New Products

Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses.  The Trigger input

Doepfer's second generation clock divider has been significantly enhanced when compared to the A-160: three sets of clock divisors and two output modes can be

Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on

Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on

Module A-161 is an eight-step Clock Sequencer which is internally connected to the Clock Divider (A-160).  Eight outputs are sequentially switched by the clock

Module A-162 contains two identical circuits that generate a trigger signal with adjustable delay and lenght from an incoming rectangle signal (e.g. gate, trigger,

Dual logic module with 3 inputs for each unit. The logical states of the inputs ("1" = high / "0" = low) are linked together in 3 ways: AND, OR, EXOR

Module A-170 contains two separate slew limiters, also known as portamento controllers or integrators. The first SL has just one joint control, which sets both rise and

Module A-170 contains two separate slew limiters, also known as portamento controllers or integrators.  The first SL has just one joint control, which sets both

Much more than just a plaing slew limiter the A-171-2 is a multi-functional module for generating and processing control voltages and audio signals in the manner of a

A-174-2 is a modulation wheel module with two wheels. The factory setting is a spring loaded wheel at the left side with bipolar voltage output (i.e. 0V in center

Economically priced module for connecting one foot controller and one double foot switch for control A-100 functions by means of the feet. For example the frequency of a