Eurorack Kits



Product Image Item Name- Price
4ms - Pingable Envelope Generator - DIY Kit

4ms - Pingable Envelope Generator - DIY Kit

The Pingable Envelope Generator (PEG) from 4ms is a dual envelope generator whose envelope lengths are set by incoming clocks or "pings". The PEG has full CV control of envelope shape, skew, and ping (clock) division/multiplication, as...

in stockin stock
219,00 €Details
4ms - Quad Pingable LFO - DIY Kit

4ms - Quad Pingable LFO - DIY Kit

The Quad Pingable LFO is a compact, playable four-channel tap-tempo, clock-syncable LFO with variable skew and reset. The QPLFO is designed to be useful in small portable systems that require maximum functionality in minimal space, as well as large...

in stockin stock
209,00 €Details
4ms - SCM Breakout - DIY Kit

4ms - SCM Breakout - DIY Kit

The SCM Breakout is an add-on module for the Shuffling Clock Multiplier. It adds a host of new features for controlling shuffle/swing patterns (Slip, Shuffle, and Skip), as well as Pulse Width, Mute, and 4x Fast. Each feature has a CV jack and...

in stockin stock
129,00 €Details
4ms - Shuffling Clock Multiplier - DIY Kit

4ms - Shuffling Clock Multiplier - DIY Kit

The Shuffling Clock Multiplier (SCM) produces eight multiplied clock tempos from a single input clock, ranging from x1 to x8 (x32 by using the Breakout). Some of the outputs can be shuffled/swung. The amount of shuffle is controlled by a CV Slip...

in stockin stock
110,00 €Details
Doepfer - DIY Synth with temperature compensation

Doepfer - DIY Synth with temperature compensation

Low cost DIY kit to build a full-fledged analog synthesizer. The kit is made of an assembled and tested pc board that includes all that is necessary to build a standard analog synthesizer.

120,00 €Details
Doepfer - DIY Synth without temperature compensation

Doepfer - DIY Synth without temperature compensation

Low cost DIY kit to build a full-fledged analog synthesizer. The kit is made of an assembled and tested pc board that includes all that is necessary to build a standard analog synthesizer 

100,00 €Details
RYO - 3xVCA - DIY Full Kit

RYO - 3xVCA - DIY Full Kit

A simple and space-efficient voltage controlled amplifier for processing of control voltages as well as audio with precision and a good clean sound. This module gives you no less than three fully independant DC coupled linear VCAs with very similar...

in stockin stock
75,00 €Details
RYO - Airtenuator - DIY Full Kit (3-pack)

RYO - Airtenuator - DIY Full Kit (3-pack)

The RYO Airtenuator I is a floating passive attenuator you connect between two modules in your rack via patch cables, acting as a volume/modulation depth control between the source and destination. Package consists of 3 Airtenuators. Instead of...

20,00 €Details
RYO - Ampmix - DIY Full Kit

RYO - Ampmix - DIY Full Kit

An easy to build 4-channel amplifying mixer/attenuator with 2.0x gain (6dB) and 5.0V offset on each channel in an 8hp module. No calibration required. Ampmix was designed as a handy CV mixer and processor with good precision, high input impedance...

in stockin stock
60,00 €Details
RYO - APERTURE VACTROL VCF/VCA - DIY Full Kit

RYO - APERTURE VACTROL VCF/VCA - DIY Full Kit

The RYO Aperture is a vactrol lowpass filter and VCA module inspired by the much beloved 292 Lopass Gate from the Buchla 200 series modular system of the 1970s. However, rather than being a straight up clone, the Aperture is a newly developed and...

in stockin stock
139,00 €Details

© 2015-2018 Raw Voltage        Programming: webchills        Shopsoftware: Zen Cart
We accept SOFORT Banking, PayPal and Credit Cards