Clock & Trigger



Product Image Item Name- Price
4ms - Quad Clock Distributor

4ms - Quad Clock Distributor

Four channel voltage controlled Clock Divider/Multiplier with master Tap Tempo. Each channel can be synced to the tap tempo, to the channel above, or to an external clock. Each channel also has a reset jack.  With a Tap Tempo button and five...

in stockin stock
249,00 €Details
4ms -Quad Clock Distributor Expander

4ms -Quad Clock Distributor Expander

The QCD Expander is an expansion module for the Quad Clock Distributor (QCD). The QCD Expander adds a host of features, turning the QCD into a programmatic non-linear sequencer. Each channel gets a CV Trigger Delay (Pulse Width) jack and knob, an...

in stockin stock
149,00 €Details
Doepfer A-160 Clock/Trigger Divider

Doepfer A-160 Clock/Trigger Divider

Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses.  The Trigger input will take clock signals from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV...

65,00 €Details
Doepfer A-160-2 Clock Divider II

Doepfer A-160-2 Clock Divider II

Doepfer's second generation clock divider has been significantly enhanced when compared to the A-160: three sets of clock divisors and two output modes can be selected from and with jupers the reset behaviour and polarity of inputs and output...

100,00 €Details
Doepfer A-160-5 Clock Multiplier / Ratcheting Controller

Doepfer A-160-5 Clock Multiplier / Ratcheting Controller

Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on socket CV In (0...+5V) and the position of the Mode switch. The multiplied clock...

100,00 €Details
Doepfer A-162 Dual Trigger Delay

Doepfer A-162 Dual Trigger Delay

Module A-162 contains two identical circuits that generate a trigger signal with adjustable delay and lenght from an incoming rectangle signal (e.g. gate, trigger, rectangle output of an LFO or VCO). The rising edge of the incoming signal is used to...

65,00 €Details
Doepfer A-165 Dual Trigger Inverter/Modifier

Doepfer A-165 Dual Trigger Inverter/Modifier

Module A-165 (Dual Trigger Modifier) contains two separate trigger modifiers, to use with logical / digital levels (Gate, Clock, Trigger). Each half of the module enables signals generated by the A-100 to communicate with other instruments (such as...

65,00 €Details
Evaton - CLX

Evaton - CLX

The CLX is a dual clock source module, with two independent, free-running, 50% duty-cycle square wave analog oscillators, plus logic outputs.  Each oscillator has its own frequency control knob, and a high and low frequency range, which is...

179,00 €Details
Noise Engineering - Integra Solum

Noise Engineering - Integra Solum

Integra Solum is a dual rotating clock divider with 16 trigger outs in two sets of eight. The two sides can be clocked or reset independently or a single input and/or reset normals to both sides. IS switches between three modes and an encoder...

in stockin stock
235,00 €Details
Noise Engineering - Zularic Repetitor

Noise Engineering - Zularic Repetitor

Zularic Repetitor is a rhythmic gate generator based on African music theory. A core pattern forms the basis and variation is achieved by offsetting this pattern in time relative to the base. This module contains 30 mother rhythms from African,...

269,00 €Details

© 2015-2019 Raw Voltage        Shopsoftware: Zen Cart
We accept Amazon Pay, SOFORT Banking, PayPal and Credit Cards